Цифровая платформа по разработке и применению цифровых двойников CML-Bench®
Уникальный онлайн-курс «Цифровые двойники изделий»
CAD/CAE/CFD/CAO/HPC новости 9 Июня 2007 года
Данная новость была прочитана 4825 раз

Компания think3 анонсировала прямую интеграции между thinkdesign и ANSYS®Workbench™

Ведущий разработчик программного обеспечения для поддержки всего цикла разработки изделия think3 анонсировал новую возможность среды 3D моделирования thinkdesign – прямую интеграцию с ANSYS®Workbench™.

Новая возможность thinkdesign версии 2007.1 позволит пользователям импортировать пространственные CAD модели, построенные в thinkdesign, в среду конечно-элементного моделирования ANSYS Workbench.

think3 announces a direct link between their solutions and the ANSYS simulation environment – and it’s free of charge for all think3 customers

With this new integration, think3 strengthens its position as a supplier of complete solutions that fulfil the requirements of the entire product development cycle, from concept to engineering.

Milan, 6 June 2007 - think3, a leading supplier of solutions for product development and innovation, has announced the availability - for all its users and with no need for additional modules – of a direct link between thinkdesign,   its 3D modelling environment, and the ANSYS® Workbench™ analysis solution.

This new integration, released with the 2007.1 version of thinkdesign, means that solid models obtained in the think3 3D environment can be transferred directly to the ANSYS Workbench simulation environment.

Linking the two solutions makes it possible to combine think3’s CAD tool – familiar to mechanical designers, with the powerful analysis functions of ANSYS software - extremely useful to engineers looking for answers from the simulation front.

“This link with think3's thinkdesign highlights the flexibility of the ANSYS Workbench environment," said Brian Drew, Vice President at ANSYS, Inc. "The focus of ANSYS Workbench is to facilitate 'simulation-led development,' and we greatly value think3's effort to ensure a high degree of interoperability between their design software and our simulation solution.”

The match between the two solutions also benefits from associativity links. They make it possible to update a FEM scenario after a CAD modification while maintaining constraints and loads, and to regenerate a thinkdesign three-dimensional geometry after an optimisation cycle using the ANSYS Workbench simulation environment and the ANSYS solver.

This new integration reinforces think3’s position as a supplier of complete solutions that satisfy the needs of the entire product development cycle.

Information about Ansys, Inc.

ANSYS, Inc. (NASDAQ: ANSS), founded in 1970, develops and globally markets engineering simulation software and technologies widely used by engineers and designers across a broad spectrum of industries. The Company focuses on the development of open and flexible solutions that enable users to analyze designs directly on the desktop, providing a common platform for fast, efficient and cost-conscious product development, from design concept to final-stage testing and validation.The Company and its global network of channel partners provide sales, support and training for customers. Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 40 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ approximately 1,400 people and distribute ANSYS products through a network of channel partners in over 40 countries. Visit www.ansys.com for more information.

ANSYS, ANSYS Workbench, AUTODYN, CFX, FLUENT and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries.All other brand, product, service and feature names or trademarks are the property of their respective owners.

Information about think3, Inc

think3 has been operating in the ICT sector for more than 25 years and provides the only technology that links three separate design areas: the concept, its development and the finished product. In this way, think3 enables thousands of company customers to innovate, to compete and to rise to the challenges of global markets, thanks to the integration of processes, which helps to accelerate time to market and to reduce costs.

Having been active in emerging markets with dedicated structures for many years, think3 can provide outsourcing services, thus offering companies a new opportunity to go international. All this means that think3 can count among its customers some of the most significant enterprises in the industrial market.

With offices inEurope,Asiaand in the United States, think3 is present throughout other global markets too, with its network of selected VARs (Value Added Resellers).

Источник: http://www.think3.com/

 

 

 

Теги новости:
ANSYS ANSYS Workbench